Why does my Brother printer says drum End Soon?

Why does my Brother printer says drum End Soon?

The message Drum End Soon indicates the drum unit will need to be replaced soon. You can replace the drum unit when you feel the print quality is no longer acceptable or when the message Replace Drum is displayed.

How do you fix drum ends soon?

If your machine’s display reads “Drum End Soon”, the drum unit is near the end of its life and it is time to buy a new one….”Drum End Soon” message

1. Open the front cover.
2. Hold down Ok until Drum Unit is displayed, and then press Ok.
3. Press ▲ to reset. Machine will display Accepted.
4. Close the front cover.

How do I reset the drum end on my Brother printer?

Reset the Drum Counter

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

How do you reset the drum counter on a Brother MFC 7860dw?

How to reset the drum counter:

1. Make sure the printer is on, then open the front cover and push “clear” button.
2. Press “1” to confirm you are installing a new drum.
3. When the screen says “Accepted”, close the front cover and you can now start printing!

How do you reset the drum on a Brother MFC L2710DW?

Reset Drum for Brother MFC-L2710DW

1. Make sure the machine is turned on.
2. Close the front cover.
3. Press OK and the Up arrow key at the same time.
4. Press OK to select Drum.
5. Press the Up arrow key to reset the drum counter.

How do you reset the drum counter on a Brother MFC 8950dw?

1. Press Stop/Exit to interrupt the error temporarily.
2. Press Menu.
3. Press the Up or Down arrow key to display Machine Info.. Press Machine Info..
4. Press Reset Menu.
5. Press Drum.
6. The machine will display Reset Drum?.
7. Press Yes, and then press Stop/Exit.

How do you reset the drum on a MFC L2710DW?

How to reset the drum counter:

1. The printer should be on.
2. Close the front of the printer.
3. Hold down the “OK” button and the “up” arrow at the same time.
4. Press the “OK” button to select “Drum”.
5. Press the “up” arrow to reset the counter.

How do you reset the drum counter on a brother mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.

How do you reset the drum counter on a brother mfc 7460DN?

How to: Reset Toner Counter on Brother MFC-7460DN

1. Open the front panel.
2. Press the Clear/Back button. The display will show: REPLACE DRUM? Yes 2. No.
3. Ignore the display, and type *00 on the keypad. You should see accepted on the display.
4. Close the front panel, and you should be good to go.

How can I extend my brother drum life?

You can extend the drum life and keep it clean by occasionally cleaning the corona wire. You can simply do this by sliding the little plastic piece attached to the corona wire back and forth a couple of times. After you replace your drum, don’t forget to reset it.