What is PCQ queue?
Per Connection Queue (PCQ) is a queuing discipline that can be used to dynamically equalize or shape traffic for multiple users, using little administration.
What is PCQ rate?
pcq-rate (number) : maximal available data rate of each sub-steam. pcq-limit (number) : queue size of single sub-stream (in KiB) pcq-total-limit (number) : maximum amount of queued data in all sub-streams (in KiB)
What are MikroTik queues?
Queues are used to limit and prioritize traffic: limit data rate for certain IP addresses, subnets, protocols, ports, and other parameters. prioritize some packet flows over others. configure traffic bursts for faster web browsing.
What is Sfq MikroTik?
SFQ – Stochastic Fairness Queuing. PCQ – Per Connection Queuing (MikroTik Proprietary) Firewall Mangle and Address-lists. Queue Tree.
What is burst time in mikrotik?
burst-time (TIME) : period of time, in seconds, over which the average data rate is calculated. ( This is NOT the time of actual burst)
How is bandwidth managed?
Bandwidth usage is controlled through management of flows. A flow is a stream of packets that all have certain characteristics, such as the port number or destination address. These flows are managed by transport, service, or virtual machine, including zones.
What is MikroTik HotSpot?
The MikroTik HotSpot Gateway provides authentication for clients before access to public networks . HotSpot Gateway features: automatic and transparent change any IP address of a client to a valid address; starting from v6.
How does MikroTik limit bandwidth by IP address?
Starts here7:58MikroTik Tutorial 10 – Bandwidth Management Using Simple QueueYouTube
How is burst rate calculated?
burst = (rate [bps]) * 0.00025 [sec/interval]) or (maximum packet size [bits]), whichever is greater. On your case if you want to calculate the minimum burst value needed to sustain a rate of 1mbps on an ethernet network, the rate is defined as 1mbps and the maximum ethernet packet size is 1518 bytes.
What burst threshold?
burst-threshold (NUMBER) : this is value of burst on/off switch. average-rate (read-only) : Every 1/16 part of the burst-time, the router calculates the average data rate of each class over the last burst-time seconds. actual-rate (read-only) : actual traffic transfer rate of the queue.
Who controls bandwidth?
Your bandwidth is mostly determined by your device, your router, your Internet Service Provider (ISP), and the bandwidth they promised you.
What is PCQ (per connection queuing)?
PCQ (Per Connection Queuing) Used to recognize the current direction and is used because it can Manage bandwidth in a fair, equitable and massive. PCQ on Mikrotik used in conjunction with Queue, either Simple Queue, and Queue Tree. To make it easier to understand the concept of PCQ, please refer to the following analogy:
Can the queue feature of MikroTik bandwidth be separated from queue?
Setting and management in Mikrotik Bandwidth cannot be separated from the Queue feature. There are two types of the queue which can be used in Mikrotik, namely Simple Queue and Queue Tree.
What is the difference between simple queue and queue tree?
The difference that we can see directly that is only in terms of how to wear or use only. Simple Queue Where specifically is designed for ease of configuration while Queue Tree is designed to carry out the task queue is more complex and needs a good understanding of the flow of traffic. 1. Simple Queue
What is PCQ on MikroTik?
PCQ on Mikrotik used in conjunction with Queue, either Simple Queue, and Queue Tree. I have 10 PC which I will share a maximum bandwidth of 1 Mb and a minimum bandwidth of 256 kb each PC.
