How do I create a VLAN in Packet Tracer?

How do I create a VLAN in Packet Tracer?

In Cisco Packet Tracer, create the network topology as shown below:

1. Create 2 VLANs on the switch: VLAN 10 and VLAN 20.
2. Assign switch ports to the VLANs.
3. 4 .
4. PC2: IP address 192.168.1.20 Subnet mask 255.255.255.0 Default gateway 192.168.1.1.

How do I check a VLAN?

Use the show vlan command to verify your VLAN configuration. This command displays all switchports and their associated VLAN as well as the VLAN status and some extra parameters that relate to Token Ring and FDDI trunks. You can use the show vlan id [vlan#] command to see information about a particular VLAN.

How do I add a VLAN to my router?

To add a VLAN and enter config-VLAN submode on a switch, use the vlan command in global configuration mode. To name a VLAN on a switch, use the name command in VLAN configuration mode. To set the interface type, use the switchport mode command in interface configuration mode.

What is PT activity in Packet Tracer?

Overview. This is a beginning network configuration activity in Packet Tracer 6.1. This activity is designed to challenge you with some basic Cisco IOS configurations using a Cisco 1941 router, two Cisco Catalyst 2960 switches, a TFTP server and two PCs.

What is the password for the activity wizard on Packet Tracer?

PacketTracer7 – Recovery Tool After that user needs to use “Ferib” as password and can now gain access to the ‘Activity Wizard’. From there you can change the password to whatever you’d like.

How do you test if a VLAN is working?

How do I assign an IP address to a VLAN in Packet Tracer?

Here are the steps to configure an IP address under VLAN 1:

1. enter the VLAN 1 configuration mode with the interface vlan 1 global configuration command.
2. assign an IP address with the ip address IP_ADDRESS SUBNET_MASK interface subcommand.
3. enable the VLAN 1 interface with the no shutdown interface subcommand.

What is VLAN routing?

In a LAN environment, VLANs divide broadcast domains. When a host in one VLAN must communicate with a host in another VLAN, the traffic must be routed between them. This type of routing is called inter-VLAN routing. The smart switch forwards an inbound multicast packet to all ports in the VLAN.