Does Kenwood KDC 352U have Bluetooth?

Does Kenwood KDC 352U have Bluetooth?

Although the Kenwood KDC-352U does not come loaded with features such as Bluetooth and Satellite Radio ready, it does come with features such as a 24-bit converter and a 3-bad Equalizer to enhance you’re audio experience and sharpen the clarity of music.

How do I setup my Kenwood car stereo?

You can set up the tuner.

1. Select the Tuner source. Refer to .
2. Press and hold the [AUDIO] button. Enter the Function setting mode.
3. Use the [Control knob] to select “SETTINGS”.
4. Use the [Control knob] to select a Tuner setting item.
5. Use the [Control knob] to select a setting.

How do I change the color on my Kenwood KDC?

You can select the illumination color of the panel.

1. Press and hold the [AUDIO] button.
2. Use the [Control knob] to select “SETTINGS” > “DISP & KEY” > “COLOR SELECT”.
3. Use the [Control knob] to select a illumination part.
4. Use the [Control knob] to select a color (“VARIABLE SCAN”/ “COLOR01” — “COLOR24”).

What does it mean when my Kenwood car stereo Says protect?

Kenwood equips its receivers with a protection mode to safeguard them. Your stereo receiver is going into protection mode because the receiver has an internal short, a speaker is bad or the speaker wiring has a problem, such as incorrect wire gauge or bad connections.

How do I get my Kenwood radio out of Protect Mode?

Turn off the receiver and let it cool for a few hours; then try again. If the protection mode warning doesn’t go away on its own, press the reset button. If that doesn’t work, disconnect the power lead from your receiver for 30 seconds and then reconnect it. If it still doesn’t work, it’s time to take it to the dealer.

How do I get my Kenwood out of Protect Mode?

What should I set my bass and treble to?

The treble should be a little higher than the midrange (assuming you have at least a 3-range graphic equalizer). Regardless of your preference, the best way to start out setting yours up is to put all the ranges (bass, mid, treble) at whatever the neutral or halfway position is on your car, then adjust from there.