What size is M33 in inches?
Fine Thread Bolts
| NOM. DIA. | PITCH mm | DIAMETER inch |
|---|---|---|
| M30 | 1.5 | 1.1811 |
| M33 | 2 | 1.2992 |
| M33 | 1.5 | 1.2992 |
| M36 | 3 | 1.4173 |
What size bolt has a 17mm head?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| M10 | 17mm | 17.40 |
| 7/16″UNF | 11/16″ | 17.86 |
| 18mm | 18.40 | |
| 3/8″BSW | 18.43 |
What is M33 Imperial?
M33. 1-1/4″-7.
What is M20 bolt?
M10-1.0 x 20 M = This designates the fastener is a metric size. 10 = The nominal diameter in millimeters. 1.0 = The thread pitch, or distance between threads, in millimeters. 20 = The fastener’s length, in millimeters.
What is bolt size M10?
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | |
|---|---|---|
| m10 | 10.00 | 9.78 |
| m12 | 12.00 | 11.73 |
| m14 | 14.00 | 13.73 |
| m16 | 16.00 | 15.73 |
Is M12 the same as 12mm?
Yes. M12 is a 12mm diameter thread. You have to be sure the thread pitch measured in threads per millimeter (1.5 here) is the same as what u need.
What are the different types of bolt sizes in English?
ENGLISH/ METRIC BOLT SUBSTITUTION TABLE. EQUIVALENT METRIC BOLT SUBSTITUTION – ASTM GRADE BOLT SIZES F – 568 CLASS 4.6 F – 568 CLASS 8.8 F – 588 CLASS 8.8.3 F – 568 CLASS 9.8 F – 568 CLASS 10.9 A – 325M TYPE 1 OR 2 A – 325M TYPE METRIC ENGLISH 3 (MM) (INCHES)
What is the ultimate tensile strength of the bolt?
fub is the ultimate tensile strength of the bolt depending on the bolt class (see table above) A is the appropriate area for shear resistance. When the shear plane passes through the threaded part of the bolt A is equal to the tensile stress area of the bolt As.
What is the minimum and maximum spacing for bolts in EN 1993?
Minimum and maximum spacing p1, p2 and edge distances e1, e2 for bolts are given in EN1993-1-8 Table 3.3. The minimum values are: e1 ≥ 1.2d0, e2 ≥ 1.2d0, p1 ≥ 2.2d0, p2 ≥ 2.4d0, where d0 is the diameter of the hole, e1, p1 are measured parallel to the load transfer direction and e2, p2 are measured perpendicular to the load transfer direction.
What is the shear resistance of bolt per shear plane?
The shear resistance of the bolt per shear plane Fv,Rd is provided in EN1993-1-8 Table 3.4 : αv is a coefficient that takes values αv = 0.6 for bolt classes 4.6, 5.6, 8.8 or αv = 0.5 for bolt classes 4.8, 5.8, 6.8 and 10.9. When the shear plane passes through the unthreaded part of the bolt αv = 0.6.
