What material should cabinet pulls be made of?
With metal, you can choose cabinet pulls in nickel, pewter, chrome, stainless steel, and bronze in varying finishes, such as satin or oil-rubbed. Metal is the most popular material for cabinet and drawer pulls, although glass looks beautiful in a traditional kitchen, and crystal gives the room a vintage vibe.
What can I use for drawer handles?
Plastic toys from the dollar store or thrift shop are great pieces to start with. The plastic is softer and very forgiving if you end up needing to take a few tries to get the hole drilled out. They are somewhat large for your basic door knob or drawer pull, but could work on the right piece.
Is zinc or steel better for cabinet pulls?
Though some Zinc alloys can be very strong, overall stainless steel is stronger. However, zinc is a heavy element, and when alloyed with other metals it provides better corrosion resistance, stability, dimensional strength and impact strength.
Can you mix cabinet hardware finishes?
Mixing metal finishes can add dimension and visual interest to a room. Instead of a monochromatic, one-note space, you create intrigue and the illusion of texture. When you mix metals, you can blend styles, making a room look more or less modern depending on your personal taste.
How to install drawer pulls?
Measure the Drawer. Measure the vertical height and horizontal width of the drawer face.
How do you install cabinet handles?
How to Install Cabinet Handles On the inside of the cabinet door, use a pencil to mark the places where you want the screws for the handle to go. Drill small starter holes at the places you marked. Slide the provided screws into the starter holes. Position the handle on the outside of the cabinet.
How are drawer pulls measured?
Place the drawer pull on a work surface with the threaded posts facing up. Measure from the center of the screw hole in one threaded post over to the center of the other screw hole with a tape measure.
How do you hang kitchen cabinets?
Hang the upper cabinets by placing them level against the wood strip and screwing them into the wall with wood screws. As you hang the adjoining the cabinets, make sure that they are square and level which each other.
