What does an oil interceptor do?
Oil interceptors separate oily waste from interior drainage systems or exterior run-off areas, preventing environmentally damaging and potentially dangerous oil substances from entering septic fields, run-off areas, and wastewater treatment facilities.
What are drainage interceptors?
Drain interceptors or drain separators are seen as the final line of drainage defence. They are designed to stop contaminants from commercial and industrial sites (such as production facilities, storage areas and even car parks) from creating a pollution hazard.
What is the difference between oil and grease interceptor?
Grease interceptors have a primary function of removing fatty solids from wastewater. They are most often used in commercial kitchens or similar applications. Oil separators have a primary function of removing liquid oil from wastewater.
What is an oil grit interceptor?
Highland Tank’s Oil/Sand Interceptor (OSI) is treatment tank designed to intercept and collect sand, grit, free-oil and grease (hydrocarbons and other petroleum products) in a wastewater flow, and prevent their entry into the sanitary sewer system.
What are drainage sumps?
A sump is defined as a low area which prevents the free passage of water, and results in flooding of streets or private property. Generally, gravity flow drainage facilities may be installed for sumps; however, there are some drainage situations which would require the use of a sump pump.
What are the two types of interceptors?
There are 2 main types of Petrol/Oil Interceptor; Full Retention Interceptors, which are designed to treat the full flow delivered by a drainage system up to 50 mm/hr. Bypass Interceptors which, are designed to treat flows of up to 5 mm/hr. This covers 99% of rainfall.
Do grease interceptors smell?
While a grease trap separates the FOG from the wastewater, some food particles and organic solids are trapped inside, eventually settling to the bottom of the tank. The sulphuric gases are responsible for producing the foul smell inside the grease trap.
Do grease interceptors need power?
Power to the unit should be turned Off, accumulated grease and oils must be removed, and clogged components must be cleaned. Once the interceptor has been filled with clean water, replace the covers and turn the Power On.
What is a sediment interceptor?
Sediment interceptors separate heavier-than-water sediments or floating debris from plumbing waste systems to help prevent clogs, standing water, overflows, process difficulties and environmental problems.
How do oil interceptors work?
Oil Interceptors Oil interceptors separate oily waste from interior drainage systems or exterior run-off areas, preventing environmentally damaging and potentially dangerous oil substances from entering septic fields, run-off areas, and wastewater treatment facilities.
What are the features of an oil and sediment interceptor?
These Oil & Sediment Interceptors Feature: an acid resistant coat on the exterior and interior, fabricated steel construction, bronze cleanout plug and visible double wall trap seal, removable sediment bucket, horizontal baffle, internal vent connection, with removable Dura-Coated heavy-duty cast iron grate.
How do you install an oil interceptor on a sewer line?
Install the interceptor in the building sewer line. The interceptor may be set on the floor, partially recessed in the floor, top flush with the floor, or fully recessed below the floor to suit piping and structural conditions. All Zurn oil interceptors with oil level sensors must be installed sitting on the floor or recessed in a pit.
How much does a z1189 oil & sediment interceptor cost?
Oil & Sediment Interceptor Model # Sludge Capacity (Lbs.) Grate Open Area Approx. Wt. (Lbs) Price & Quantity Z1189-12 12 49 70 $1,604.93 Z1189-60 60 131 175 $3,981.27 Z1189-100 100 262 280 $5,879.48
