What documents must be included in an exposure control plan?

What documents must be included in an exposure control plan?

A description of the device being used (including type and brand) Protective equipment or clothing that was used at the time of the exposure incident (gloves, eye shields, etc.) Location of the incident (O.R., E.R., patient room, etc.) Procedure being performed when the incident occurred.

What are the 5 steps of an exposure control plan?

Contact the Office of Risk Management for questions.

• Step 1: Required Personal Protective Equipment.
• Step 2: Equipment.
• Step 3: Decontamination Procedures.
• Step 4: Disposal.
• Step 5: Decontaminate Re-useable Equipment.
• Step 6: Wash Your Hands.

What are work practice controls for bloodborne pathogens?

Work practice controls are intended to reduce the likelihood of exposure by changing the way a task is performed. They include appropriate procedures for handwashing, sharps disposal, lab specimen handling, laundry handling, and contaminated material cleaning (OSHA, 2019b).

What are the key elements of CBP exposure control plan?

The Plan describes how the employer will:

• Use engineering and work practice controls to minimize the employee‟s exposure.
• Ensure use of personal protective equipment.
• Provide training.
• Provide medical surveillance.
• Provide Hepatitis B vaccinations.
• Use signs and labels.

What is the first step in the exposure control plan?

1. Exposure determination – The plan should include the names, department and task of each employee where the potential for occupation exposure to bodily fluids exists.

What items are not PPE?

Protective Clothing Examples of the body/skin protection include laboratory coats, coveralls, vests, jackets, aprons, surgical gowns and full body suits. Uniforms, caps, or other clothing worn solely to identify a person as an employee would not be considered PPE.

What best describes a work practice control?

What is 29 CFR Section 1030 bloodborne pathogens?

29 CFR § 1910.1030 – Bloodborne pathogens. § 1910.1030 Bloodborne pathogens. (a)Scope and Application.This section applies to all occupational exposure to blood or other potentially infectious materials as defined by paragraph (b) of this section.

What is the standard number for OSHA 29 CFR?

OSHA Regulations (Standards – 29 CFR) – Table of Contents Standard Number: 1910.1030 Standard Title: Bloodborne pathogens. Subpart Number: Z Subpart Title: Toxic and Hazardous Substances. (a) Scope and Application.

Is a copy of the exposure control plan available to employees?

1910.1030 (c) (1) (iii) Each employer shall ensure that a copy of the Exposure Control Plan is accessible to employees in accordance with 29 CFR 1910.20 (e). 1910.1030 (c) (1) (iv)

What should an employer do to prevent the spread of infectious diseases?

Employers shall ensure that employees wash hands and any other skin with soap and water, or flush mucous membranes with water immediately or as soon as feasible following contact of such body areas with blood or other potentially infectious materials.