How do you measure a Baxi grate?
Overview: BAXI FANTOM Bottom Grate. Measurements of the Baxi Fantom Grate are: 185 (Front to back) x 350mm (Front) x 260mm (back).
What is a Baxi grate?
The Baxi Burnall is a two piece fire grate to suit 18″ Baxi fireplaces. Manufactured from quality cast iron this burnall fire grate is ideal for burning coal, logs and other solid fuels.
Do I need a fireback for an open fire?
You really need a fireback if the back wall of the fireplace is damaged by the fire. In addition, a fireback has the additional advantage that the cast iron of the fireback is warmed by the fire and the fireback therefore radiates extra heat. The heat efficiency of the fire thus becomes 50% higher.
What size should my fireplace grate Be?
The grate should be no wider than the back of your fireplace; dimension (A) shown above. Our grates come in widths of 11, 16, 21, 26, and 31 inches.
What is a Baxi fire?
The fire is built on a lower than normal grate and draws the air to burn the fuel from under the floorboards through a pipe. Using a Baxi fire will reduce the draughts in a room because the combustion air for the fire is coming directly from outside and so less of the air from the room is going up the flue.
How do you use a Baxi open fire?
The Baxi Burnall system draws the air needed for combustion from under the floor or outside the room. The air being drawn to the fire is controlled by an air control lever on the front of the grate that can be opened or closed. By opening or closing the valve you can effectively turn the fire up or down as required.
How thick is a fireback?
1″ thick firebacks as well as some of the larger 3/4″ backs may be too heavy for pre-fab fireplaces to safely support, they are intended for use in full masonry fireplaces only. Important: Be sure that the fireback you purchase is no wider than the back wall of your fireplace.
How thick should a fireback be?
You can select a fireback up to the width of your fireplace’s back wall. (Sometimes that is the same width as your fireplace opening and other times the firebox tapers, so the back wall is narrower.) If for example, the back wall of your fireplace is 22 inches wide, you can safely use a fireback up to 22 inches wide.
Can you replace a Baxi fire brick?
Discounted Baxi Open Fire Replacement Fire Bricks and Side Cheeks spares for Baxi Standard 16 & 18 Inch and Baxi Burnall 16,18 ,20 ,22 & 24 Inch fires. If a Fire Brick is cracked or damaged it is recommended that it is replaced or repaired otherwise it will quickly disintegrate.
What is a fireback plate on a fireplace?
Fireplace Firebacks Firebacks are an essential part of your fireplace that have stood the test of time. These solid metal fireplace fireback plates protect the masonry of your fireplace as well as reflect heat back into your home to increase energy efficiency.
What are the best fire backs for gas fireplaces?
This fire backs can use with gas logs as well as wood-burning fireplaces. It will radiate heat directly to your room and make you feel warmer even during the winter. It is made of solid cast iron to enhance its durability. 7. Black Cast Iron Grape Fireback
What is a Baxi cast iron side reducer?
000957 Baxi Burnall CAST IRON SIDE REDUCERS (sold as a pair). Suits Baxi 16, 18, 20, 22 & 24 Inch Burnall Fires Side Reducers that sit on the left and right of the fire to help reduce the amount of fuel / coal used at any one time. …..
