How do you clear the codes on an Onan generator?

How do you clear the codes on an Onan generator?

How to Clear a Fault Code on Onan Generator

1. Locate the primer button on the generator.
2. Hold the primer button down for at least 30 seconds.
3. Release the button and start the generator.
4. Allow the generator to run for 15 minutes, to ensure that the code has cleared.

What does 3 flashes on an Onan generator mean?

From the Onan manual: Three blinks indicates a service fault. Press Stop once to cause the two-digit, second-level fault code to blink. ( Pressing Stop again will stop the blinking.)

How do I reset my Onan 7500 generator?

Hold down Stop/Prime and it should show a steady red light. If not repeat above. If it has a steady red light on Stop/Prime then start the generator as usual. Once it stabilizes turn on the breakers.

What does the second number in a SAE fault code?

The second character is a digit, typically 0 or 1, and shows whether or not the code is standardized. 0 indicates that the code is generic, standardized SAE (Society of Automotive Engineers) code. Generic codes are adopted by all cars that follow the OBD-II standard.

What does the Onan fault code mean on a generator?

Onan Fault Codes are easy to learn if you do not blink while they are sending their message. This code will only blink twice. It shows that the generator is low on oil and you need to add more. Twist off the yellow cap to look at the gauge and see how much more you need to put in.

Are there any authorized Onan RV generator service dealers?

WHEN YOU’RE LOOKING FOR AN AUTHORIZED ONAN RV GENERATOR SERVICE DEALER, YOU DON’T HAVE TO LOOK FAR. Cummins has recently transitioned the branding on our RV generators from Cummins Onan to Onan RV generators under the Cummins brand and family. This directory will provide you a listing of authorized Onan RV generator service dealers.

How do I know if my Onan generator is 3400 rpm?

3 flashes, a pause and then one flash tells you that your Onan generator is going faster than 3,400 rpm. The trick here is to make sure you do not confuse 13 with 31. You can double-check by pressing the stop button 3 times in 5 seconds.

How often should a Cummins Onan generator be serviced?

Even within the Cummins Onan product line, service intervals and procedures vary depending on the generator size and date of manufacture; while some of the basics may apply to other diesel generator brands and models, be sure to check the owners manual for specific instructions.