How do I reset my Synology to factory settings?

How do I reset my Synology to factory settings?

Locate the RESET button on your Synology NAS. Press and hold down the RESET button for about 4 seconds until you hear a beep. Release the button immediately. Within 10 seconds, press and hold down the RESET button again for 4 seconds until you hear 3 more beeps.

Does resetting Synology wipe data?

Resetting the Synology NAS does not impact its data. However, we strongly recommend launching Backup & Replication (available on DSM 5.2) or Hyper Backup (available from DSM 6.0) to back up data and system configurations before the reset.

What does resetting Synology do?

There are 2 ways of resetting your Synology NAS. A so-called soft reset and a hard reset. When doing a soft reset, you only restore the NAS’s user account and network settings. When doing a hard reset, you delete the entire operating system, and you’ll be able to set up the NAS again.

How do I reset Synology password without losing data?

Resolution

1. Locate the RESET button on your Synology device.
2. Use a paper clip to gently press and hold the RESET button until you hear a beep, and then release the button immediately.
3. The device and password are now reset.

How long does it take to reset Synology?

This usually takes 15 minutes or so. When the NAS has rebooted, click the “Connect” button.

How do I reset my Synology password without losing data?

How do I hard reset my XR?

iPhone X, XR, XS, and XS Max: How to Hard Reset

1. Quickly press and release the Volume Up button.
2. Quickly press and release the Volume Down button.
3. Press and hold the Side button until the Apple logo appears, then release the Side button.

How do I Reset my Synology NAS to default settings?

When the pop-up window appears, check the box next to the red text, and then click the “Erase All Data” button. Next, enter in your admin login password and hit the “Submit” button. Your Synology NAS will begin the reset process.

How do I reinstall DSM in synology assistant?

DSM is now ready to be reinstalled. Open up Synology Assistant, and then double-click your NAS drive (it will say “Configuration Lost” next to it) to access it. Click the “Re-install” button. Next, hit the green “Install Now” button. Wait for the NAS to reinstall DSM and reboot itself. This usually takes 15 minutes or so.

Is the Synology ds418play still working?

The Synology DS418play normally works fine however it has recently developed a fault where the Synology losses its configuration and i’m unable to access it on on the network. I then have to go to find.synology.com this is where it reports “configuration lost” and i have to start the process of reinstalling all the o/s,all apps and settings.

How do I Reset my DSM to default settings?

Sign in to DSM using the password you have just created. This mode wipes out all system configurations and carries out all the reset functions included in Mode 1. Press and hold down the RESET button for about 4 seconds until you hear a beep. Release the button immediately.