How do I reset my Brother HL 5370DW printer?

How do I reset my Brother HL 5370DW printer?

Reset the settings to factory default

1. Power the machine off.
2. Press down the GO button and power the machine on.
3. Keep pressing GO until the all LEDs are on. The Status LED will be off.
4. Release GO. All LEDs will be off.
5. Press GO ten times. Your machine’s printer settings will be reset.

How do I setup my Brother HL 5370DW wireless?

Power on the printer and see that the machine achieves a Ready state. Now, hold the WPS, SecureEasySetup, or AOSS button on the WLAN router for a few seconds as a step towards Brother HL-5370DW Wireless Setup. Next, press and hold the setup button positioned at the Brother HL-5370DW backside for less than 2 seconds.

Why doesn’t my Brother printer have an IP Address?

– If the IP Address is still not valid, try the following possible resolutions: – Try a different Ethernet cable. – Reboot the power to your router, access point, or switch. – Make sure that your router is configured to automatically assign an IP Address to connected devices.

How do I print a network configuration page on my Brother printer?

How do I print a network configuration page?

1. Press the ‘+’ key until you see “INFORMATION”
2. Press the ‘SET’ key.
3. Use the ‘+’ or ‘-‘ keys until you see “PRINT SETTINGS”
4. Press the ‘SET’ key and the print configuration pages are printed.

How do I reset my Brother HL 2270DW wireless?

Brother HL-2270DW – Factory Reset

1. Turn off the printer.
2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
3. Release GO, all the LEDs will turn off.
4. Press GO ten (10) times. The printer will automatically restart.

How do I reset my Brother printer IP address?

Front Panel Method

1. Press the ‘+’ button until ‘NETWORK’ is displayed on the printer LCD panel.
2. Press the ‘Set’ button to display ‘TCP/IP’ On printers with two line displays,
3. Press the ‘Set’ button.
4. ‘TCP/IP ENABLE’ is displayed.
5. Press the ‘+’ button.
6. IP ADDRESS is displayed.
7. Press the ‘Set’ button.

How do I get the IP address for my Brother printer?

Press the [Menu] and navigate to the WLAN tab (using the ▲/▼ arrows and the [OK] button) Press ▲ and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.